Perigord Wall Top

Perigord Wall Top Tile

£5.40

33cm tiles available in stock.

4 in stock

Category:

Description

The Perigord is a clay wall top tile for straight walls, use as an alternative to the conventional stone or concrete coping. No need to use roof tiles with the tabs broken or cut off, these tiles have 4 good edges to prevent water ingress. This tile is reversible to give a concave or convex top to a wall. 6 tiles per metre length

Available in red, 280, 330 and 600mm long.

2.3kg each for 280mm

Note: When installing these tiles, lay them on two beds of mortar, one at the front of the wall and one at the back and maintain a void under the tiles. If possible allow air to flow under the tiles by leaving a hole at either end of the wall. This will help the tiles keep dry and minimise frost damage.

Additional Information

Weight 3 kg
Dimensions 28 cm

All our building products are sourced in the UK and Europe. All are CE approved and conform to the relevant normes and standards in their countries of origin. We try, where possible, to source our supplies from small independent and family run businesses.

All our products are frostproof to ISO 10545-2 unless otherwise marked.

Please be aware that the building products we supply have been formed in a mould and have been fired in a kiln. These are natural products made from 100% pure clay and as a result after firing they can have sharp edges and also be subject to slight distortion and twisting and also display small firecracks. This is a natural result of the drying and firing process and cannot be helped and does not affect the structure of the product. Clay is a natural product and there can be variances in the colours of the finished products. Please use hand protection when moving these products. These sharp edges will weather over time if the product is used in an external environment.

Related products

Curved Corner / Kerb Bricks Curved Corner / Kerb Bricks Roman Wall Top Roman Wall Top Tile