Description
A simple, rustic, no frills and cost effective solution to wine storage. Made from a coarse clay, the surfaces are rougher than our other racks and the shaping can be slightly variable. This single hexagon is available at a length of 200mm instead of 300mm if you prefer to have the bottle neck on show and builds easily into a neat rack or it will fit in a gap of 14cm between kitchen cupboards. Assemble with cement based tile adhesive with red cement colour added for best effect, or use a lime and sand mix to allow the racks to respire.
Sizing
Each hexagon is 31cm or 21cm long, approx 12.5cm width on the parallel sides and 14cm between the points, with holes of 10cm diameter. Vertical wise,(see gallery photos) one high is 12.5cm, 2 high is 18.5cm, 3 high (2 directly on top of each other) is 25cm, etc.
Width wise, in the side to side configuration interlocked, (see gallery) 1 wide is 14cm, 2 wide the width is 25cm, 3 wide the width is 35cm etc. Stacks up to 1.2m high when freestanding, 2.5m when fixed to a wall or built in. Give us a ring if you need help sizing your rack.
Available in re, hole size approx 96mm.
See special offer page for a full or half pallet available at a reduced price.
Additional Information
| Weight |
N/A |
| Dimensions |
31 x 14 x 12.5 cm |
| Length |
20cm long, 30cm long
|
We stock 6 types of normal bottle holders to keep your wine at an ideal temperature. Also, please see our Nenuphar planters as these can be used as wine racks, the largest size is good for storing magnums etc.
All our wine racks are sourced in Europe. All are CE approved and conform to the relevant normes and standards in their countries of origin. We try, where possible, to source our supplies from small independent and family run businesses.
All our products are frostproof to ISO 10545-2 unless otherwise marked.
Please be aware that the products we supply have been formed in a mould and have been fired in a kiln. These are natural products made from 100% pure clay and as a result after firing they can have sharp edges and also be subject to slight distortion and twisting and also display small firecracks. This is a natural result of the drying and firing process and cannot be helped and does not affect the structure of the product. Clay is a natural product and there can be variances in the colours of the finished products. Please use hand protection when moving these products. These sharp edges will weather over time if the product is used in an external environment.
